Comprehensive Diesel Engine & 4WD Servicing in Sunshine North
JustFix Automotive is an independent, family-owned, VACC-accredited mechanical workshop at 120 Munro Ave, Sunshine North, dedicated to the high-pressure demands of modern turbo-diesel engines, dual-cab work utes, and 4WD touring wagons.
Modern common-rail diesel engines deliver impressive torque and towing capability, but they are far more complex than older mechanical diesels. Between exhaust gas recirculation (EGR) soot, crankcase oil vapors, strict Diesel Particulate Filter (DPF) emissions loops, and ultra-high-pressure fuel injection, neglected maintenance or generic backyard servicing can quickly lead to choked intake manifolds, engine "limp mode," or multi-thousand-dollar component failures.
Whether you drive a Toyota HiLux, Landcruiser (70, 200, or 300 Series), Prado, Ford Ranger, Everest, Isuzu D-MAX, MU-X, Mitsubishi Triton, Pajero Sport, Nissan Navara, Patrol, Mazda BT-50, or Volkswagen Amarok across Sunshine North, Sunshine, Albion, St Albans, Keilor, Caroline Springs, or Truganina, our workshop is equipped with heavy-duty hoists, factory-grade diagnostic scan tools, and specialist carbon-cleaning equipment to keep your diesel pulling strong. Every service and repair begins with a clear, itemized upfront quote and is backed in writing by our 12 Months / 20,000 km workmanship and parts warranty.
Walnut Blasting: Intake Manifold & Valve Carbon Cleaning
One of the biggest hidden performance killers in modern turbo-diesel (and direct-injection petrol) engines is severe carbon and soot buildup inside the intake manifold and on the intake valves.
Why Do Modern Diesel Intakes Choke Up With Carbon?
In a modern diesel engine, the EGR (Exhaust Gas Recirculation) system feeds exhaust soot back into the intake tract to lower combustion temperatures and reduce nitrogen oxide ($NO_x$) emissions. At the same time, the PCV (Positive Crankcase Ventilation) breather system vents oily mist from the sump back into the turbo intake. When that hot, sticky oil vapor mixes with dry EGR soot inside your intake manifold and cylinder head ports, it bakes into a thick, tar-like coal deposit. Because direct-injection engines spray fuel directly into the combustion chamber rather than over the back of the intake valves, there is no fuel wash to clean the valves automatically. Over 80,000 km to 150,000 km, this carbon sludge can restrict airflow into your engine by 30% to 50%.
How Our Walnut Shell Blasting Restores Lost Power & Economy
Spraying chemical aerosols into the air intake cannot safely dissolve hardened, baked-on carbon—and worse, dislodged chunks of hard carbon can drop into the cylinders and score turbo blades or valve seats. At JustFix Automotive, we perform proper mechanical intake teardown and Walnut Blasting:
Complete Intake Manifold Removal & Ultrasonic/Chemical De-Sludging: We remove the intake manifold, throttle body, and EGR cooler/valve assembly to clean out thick black sludge completely off the car.
Closed-Loop Crushed Walnut Shell Media Blasting: Setting each cylinder's intake valves to the fully closed position, we use pressurized, finely ground organic walnut shell media alongside a high-powered vacuum extraction adapter. The walnut grit is hard enough to strip baked-on carbon down to bare, factory-clean metal, yet biodegradable and soft enough that it will never scratch or pit aluminum cylinder heads or steel valve stems.
EGR & Boost Sensor Restoration: We clean the MAP (Manifold Absolute Pressure) sensor, intake swirl flaps, and EGR passages, fit brand-new OEM-grade intake manifold gaskets, and reset ECU airflow adaptations.
Signs your diesel 4WD or direct-injection car needs Walnut Blasting:
Sluggish throttle response, flat spots, or noticeable loss of towing power up hills.
Worsening fuel economy (extra liters per 100 km on your normal commute).
Rough idling, cold-start hesitation, or black exhaust smoke under load.
Recurring EGR airflow fault codes, swirl-flap sticking codes, or frequent DPF regenerations caused by poor air-to-fuel ratios.
Our Core Diesel & 4WD Mechanical Services
Warranty-Safe Logbook & Milestone Servicing: Complete 15,000 km, 30,000 km, 60,000 km, 90,000 km, and 120,000 km+ logbook services using 100% manufacturer-approved low-SAPS (C2/C3/CK-4) synthetic oils that protect your turbocharger bearings and DPF catalyst, complete with official VACC-member logbook stamping.
DPF (Diesel Particulate Filter) Diagnosis & Chemical Cleaning: Stop-start driving along Ballarat Road and the Western Ring Road prevents passive DPF regeneration. We read live differential pressure sensor data, resolve underlying boost or sensor faults, and perform targeted chemical DPF cleaning and forced regenerations—saving you from a $3,000+ filter replacement.
Common-Rail Fuel Injection & Water-Trap Filtration: High-pressure common-rail pumps and piezo injectors run at over 25,000 PSI, where a single drop of water or microscopic rust can cause a $4,000+ injector failure. We replace primary and secondary micron fuel filters, drain water separators, test injector return rates, and code new injectors to the ECU.
4WD Driveline, Transfer Case & Differential Servicing: Heavy towing and off-road water crossings degrade gear oils rapidly. We drain and refill front and rear differentials (including LSD additive specs), 4WD transfer cases, manual gearboxes, and automatic transmissions, while greasing tailshaft universal joints and slip yokes.
Heavy-Duty 4WD Suspension, Steering & Wheel Bearings: Full hoist inspections and replacements of sagging leaf and coil springs, leaking shock absorbers and struts, worn control arm bushes, ball joints, tie-rod ends, CV boots, and swivel hubs/wheel bearings for tradie utes carrying heavy canopy loads.
Turbocharger, Intercooler & Cooling System Overhauls: Pressure-testing intercoolers and silicone boost hoses for splits and oil weeping, replacing water pumps, thermostats, viscous fan hubs, timing belts, and radiators to prevent catastrophic diesel cylinder-head overheating.
Heavy-Duty Brakes & Electronic Parking Brake (EPB) Care: Fitting high-friction Bendix 4WD/heavy-duty brake pads (from $170 + GST), machining or replacing disc rotors, lubricating caliper slide pins, and performing safe maintenance-mode retraction on modern SUVs with electronic handbrakes.
Diesel & 4WD Maintenance Schedule Guide
Service / Component | Recommended Interval | Why It Is Critical for Melbourne Diesels |
Low-SAPS Engine Oil & Filter | Every 10,000–15,000 km or 6–12 months | Prevents oil sludge, timing chain stretch, turbo bearing failure & DPF ash blocking |
Primary & Secondary Fuel Filters | Every 20,000–30,000 km (Checked every service) | Stops water contamination & protects $4,000+ common-rail injectors |
4WD Diff & Transfer Case Oils | Every 40,000 km (Sooner if towing/off-road) | Protects ring-and-pinion gears under heavy trade payloads & boat/caravan towing |
DPF Soot Load & Sensor Scan | Every routine service | Catches high soot percentages early before triggering engine limp mode |
Walnut Blasting Intake Clean | Every 80,000–120,000 km | Strips baked-on EGR & PCV carbon sludge to restore factory airflow & fuel economy |
Why Choose JustFix Automotive for Your Diesel & 4WD?
A Proper Physical Workshop — Zero Guesswork: Located at 120 Munro Ave, Sunshine North, our VACC-accredited facility is equipped with heavy-duty hoists, digital Snap-on torque wrenches, and deep-level diagnostic scanners. We diagnose the exact root cause rather than playing an expensive parts-swapping game.
100% New-Car Warranty Protection: Under Australian Consumer Law, you do not have to pay inflated dealership rates to keep your factory warranty valid. We follow your logbook specifications to the letter and use OEM-approved parts and fluids.
Component-Level Honesty: Whether it is cleaning your intake valves via walnut blasting instead of selling you a new manifold, chemically cleaning a blocked DPF, or servicing healthy brake calipers (5–7 mm pad life remaining) instead of upselling unnecessary rotors, we give you straight answers every time.
Upfront Itemized Quotes & Written Warranty: You receive a clear, itemized quote before a single spanner touches your 4WD, and all workmanship and parts are backed in writing by our 12 Months / 20,000 km Warranty.



